EN 
AR
JA
KO
PL
PT
RU
ES
VI
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
NO
SV
CA
TL
IW
ID
LV
Solar Panel, sliver frame AU460-36V-MH 2094×1038×30 (90cm)-1
| MECHANICAL CHARACTERISRTICS | |
| Cell Type | 166*83 Mono |
| No.of Cells | 144(12*12) |
| Dimensions | 2094*1038*30mm |
| Weight | 23.50kg |
| Front Glass | 3.2mm hightransmission,lowiron,tempered glass |
| Frame | Anodized Aluminium Alloy |
| Junction box | IP67/IP683diodes |
| Output cables | 4mm²cable55cm (Inlcuding MC4 connector) |
| MaxWind Load/Snow Load | 2400Pa/5400Pa |
| PACKING WAY | |
| 40HQcontainer | 22 Packages/858 pcs |
Specifications
| ELECtrICAL DATA(STC) | ||||
| Model Type | AU430-36V-MH | AU440-36V-MH | AU450-36V-MH | AU460-36V-MH |
| Peak Power(Pmax) | 430.00 | 440.00 | 450.00 | 460.00 |
| Maximum PowerVoltage(Vmp) | 40.70 | 41.10 | 41.50 | 41.90 |
| Maximum Power Current(Imp) | 10.57 | 10.71 | 10.85 | 10.99 |
| Open Circuit Voltage(Voc) | 48.50±3% | 48.90±3% | 49.30±3% | 49.70±3% |
| Short Circuit Current(1sc) | 11.31±3% | 11.46±3% | 11.60±3% | 11.72±3% |
| Module Efficiency(%) | 19.78 | 20.24 | 20.70 | 21.16 |
*STC: irradiance 1000W/㎡,AM1.5,and cell temperature of 25℃
| ELECtrICAL DATA(NOCT) | ||||
| Model Type | AU430-36V-MH | AU440-36V-MH | AU450-36V-MH | AU460-36V-MH |
| Peak Power(Pmax) | 321.10 | 328.60 | 336.10 | 343.50 |
| Maximum PowerVoltage(Vmp) | 37.90 | 38.30 | 38.60 | 39.00 |
| Maximum Power Current(Imp | 8.47 | 8.59 | 8.70 | 8.80 |
| Open Circuit Voltage(Voc) | 45.50±3% | 45.80±3% | 46.20±3% | 46.60±3% |
| Short Circuit Current(Isc) | 9.15±3% | 9.27±3% | 9.38±3% | 9.48±3% |
*NOCT:irradiance 800W/㎡,AM1.5,ambient temperature 20℃,wind speed1m/s
| TEMPERATURE & MAXIMUM RATING | |
| Maximum System Voltage(V) | 1500V |
| Maximum Series Fuse Rating(A) | 20 A |
| Power Tolerance | 0~+3 W |
| PmaxTemperature Coefficients(W/℃) | -0.350%/℃ |
| Voc Temperature Coefficients(V/C) | -0.270%/℃ |
| lscTemperature Coefficients(A/℃) | +0.048 %/℃ |
| NOCTNominal Operating Cell Remperature(C) | 45±2℃ |
| Operatingand Storage Temperature(℃) | -40~+85℃ |
FEATURES & SPECS
Half-cut Technology
New circuit design, lower internal current and lower internal resistance loss
Significantly avoiding heat spot
The unique circuit design to reduce the temperature of heat spot significantly,so that to reduce the power loss and then increase the output of modules.
Lower cost
Increasing power generation can reduce the cost per kilowatt-hour
Excellent performance of PID resistance
The performance of PID resistance(Potential Induced Degradation) passed the standard of TUV Nord.
Customer Questions & Answers
Did not match any questions!